- High-Performance Formula
- Increases Oil Pressure
- Quiets Noisy Engines & Lifters
- Protects Against Engine Wear
Product Details
Just because your car is older or has a lot of miles doesn’t mean it can’t perform like it used to. This high-viscosity formula was specially developed for older and higher-kilometre engines to improve their performance.
This high-viscosity formula increases oil film thickness, building a thicker oil cushion and increasing oil pressure in mid- to high-kilometre engines. Increased oil pressure equals increased power and a quieter-running engine. Not to mention, the Rislone High-Performance Oil Treatment cushions and coats engine internals to reduce friction and wear by preventing metal-to-metal contact between moving parts, giving your vehicle longer engine life.
- Part Number: 4471
- Dosage: One can treats 4 to 5 quarts of oil.
- Size: 443mL
Additional Information
Rislone® Oil Treatment is a high-viscosity formula developed for older and higher mileage (kilometer) engines to increase oil film thickness, building a thicker oil cushion and increasing oil pressure in worn engines.
- Cushions and coats engine parts to reduce friction and wear by preventing metal-to-metal contact between moving parts giving your vehicle longer engine life.
- Increased oil pressure equals increased power and a quieter running engine.
- Improved high-performance VI Viscosity Improver formula performs better in both hot and cold weather.
- Works with all petrol and diesel engines using conventional, high mileage and synthetic oil.
DIRECTIONS:
Bring engine up to normal operating temperature. With engine off add entire can of Rislone Oil Treatment to engine crankcase. (where you add oil).
For badly worn engines, use two cans.
Rislone Oil Treatment may be used anytime, at or between oil changes.
DOSAGE:
Use one can for normal passenger car, truck and SUV engines.
For larger engine systems, use 1 can for every 5 quarts (4.7 liters) of oil capacity. Do not overfill.
On 4-stroke ATV, motorcycle and small engines, including wet clutch applications, use approximately 3 ounces per quart (90 mL per liter) of oil capacity.
For badly worn systems, use double recommended dosage.
